RadioLAN 150 Instructions d'exploitation télécharger pdf (Page 37)

NETGEAR Wireless N150 Access Point WN604 Reference Manual

Basic Installation and Configuration 2-13

v1.0, March 2010

– IP Subnet Mask. The Access Point will automatically calculate the subnet mask based on

the IP address that you assign. Otherwise, you can use 255.255.255.0 (the default) as the

subnet mask.

– Default Gateway. Enter the IP address of the gateway for your LAN. For more complex

networks, enter the address of the router for the network segment to which the wireless

access point is connected.

– Primary DNS Servers. The WN604 will use this IP address as the primary Domain Name

Server used by stations on your LAN.

– Secondary DNS Servers. The WN604 will use this IP address as the secondary Domain

Name Server used by stations on your LAN.

– Network Intgrity Check. Check this box to enable the WN604 to validate that the

upstream link is active before allowing wirelessassociations.If you set this option you

must ensure your default gateway is configured.

3. Click Apply to save your basic IP settings.

Wireless Settings

The following sections describe how to configure the available wireless settings.

Configuring 802.11b//jointfilesconvert/308270/bg/ng Wireless Settings

To configure the wireless settings of your 802.11b//jointfilesconvert/308270/bg/ng wireless access point:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 109 110

Pas de commentaire

RadioLAN 150 Instructions d'exploitation Page 37