RadioLAN 150 Instructions d'exploitation télécharger pdf (Page 90)

NETGEAR Wireless N150 Access Point WN604 Reference Manual

5-8 Advanced Configuration

v1.0, March 2010

• Wireless Point to Point Bridge

• Wireless Point to Multipoint Bridge

• Client mode

3. If you have selected one of the first two options:

• Select Enable Wireless Client Association, if desired.

• Select the security profile whose settings you wish to edit

• Click Edit to edit the security profile as discussed in the previous sections. The Edit

Security Profile screen displays, as shown Figure 5-5 below.

• Click Back to return to the previous screen and enable the profile.

4. If you have selected Client:

• MAC Clone: This option appears only in client mode. Use it to configure a new MAC

address on the AP Client if desired.

• MAC Clone Address. If the MAC Clone option has been enabled enter the new MAC

address in hexadecimal format. It will be used by the AP client in place of its default

physical address.

5. Click Apply.

Figure 5-5 Bridging - Edit Security Profile

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 109 110

Pas de commentaire

RadioLAN 150 Instructions d'exploitation Page 90